RENO is a highly integrated ultra-low power embedded certified multi-protocol module supporting concurrent Bluetooth 5.0, Thread/ZigBee/ANT and NFC-A tag. RENO interfaces to user’s MCU with UART and SPI. This small form-factor module reduces the system cost and gives design flexibilityby including all the analog front-end, crystals and antenna.
RENO module is based on Nordic nRF52840 SoC. This module offloads the host processor and reduces user’s development cost and time to market with integrated wireless stacks, network stack, and application APIs and all the advanced security features supported by ARM Trust Zone Cryptocell-310. Module comes in industrial temperature.
Applications
- Personal fitness devices
- Wearables for wireless payments
- Connected health
- Virtual/Augmented reality applications
- Smart home sensors and controllers
- Industrial IoT sensors and controllers
- Gaming controllers
- Asset trackers and Locationing devices
Bluetooth features
- Full featured Bluetooth Low Energy 5.0 (BLE)
- Supports advanced mesh networking protocols – Certified software stacks for Bluetooth Mesh, Thread and Zigbee
- BLE secure connections and privacy
Common features
- ARM® CryptoCell 310 cryptographic accelerator and AES 128 bit encryption
- Over the air device firmware upgrade (OTA DFU)
- NFC Tag A support
- Highly optimized hardware for ultra-low power consumption with excellent performance
- Highlights of iVativ APIs and AT commands
- Ready to use on all popular MCUs with zero or negligible porting effort
- Seamless integration for RTOS or bare-metal based user application
- Agnostic to underlying SoC / Chipset and its respective SDKs / firmware
- Secure boot enabled
- OTA FW update support
- Support for the AT commands for easy evaluation and Binary APIs for production
- Support for UART and SPI to interface with host MCU
- Easy to use AT commands set and Binary APIs to develop applications on host MCU with zero or negligible porting effort
| Wireless Protocols | Bluetooth 5, Thread, Zigbee, NFC, ANT+ |
| Frequency | 2.402 – 2.480 GHz |
| On-air Data rates |
|
| Security Features | ARM CryptoCell 310, 128-bit AES HW accelerator, Secure boot and all security features of BLE spec |
| Antenna options | PCB Trace Antenna or MHF4 connector |
| Operating modes | BLE, BLE Mesh, zigbee, Thread, BLE + ZigBee, BLE + Thread and ANT |
| Programmable output power | -20dBm to +8dBm |
| Receive Sensitivity | Bluetooth 5.0:
802.15.4: -100dBm at 250kbps |
| Current consumption |
|
| NFC | NFC-A (Type 2) Tag with wake-on field – “Touch to pair” support |
| GPIO | 46 configurable |
| Range | > 1000 meters |
| Power supply and operating voltage range | Integrated DC-DC, 1.7v to 5.5v |
| Operating Temperature | -40oC to 85oC |
| Humidity | 5-90% non-condensing |
| Package | 10mm x 15mm x 1.5mm, 0.5mm pitch |
| Certifications and approvals | FCC, IC, CE
BT SIG certification |
Product Brief |
170 KB
|
||
Quick Start Guide |
284 KB
|
||
EVK User Guide |
5 MB
|
||
Data Sheet |
2 MB
|
- RENO DVK
- RENO EVK
- 1 x Micro USB cable
- 1 x Mini USB cable
- NFC antenna
- STM32F411 MCU board
-Fill the form and submit or drop an email at sales@ivativ.com
| Part No | Protocol | Architecture | Dimensions (L x W x H) in mm |
Package | Antenna | Description | |
|---|---|---|---|---|---|---|---|
| I540E0L8-I2LT | Bluetooth 5 + NFC | Embedded | 10 x 15 x 1.5 | LGA | PCB | RENO multi-protocol module with PCB Antenna, Tray packing | Buy |
| I540E0L8-I2LR | Bluetooth 5 + NFC | Embedded | 10 x 15 x 1.5 | LGA | PCB | RENO multi-protocol module with PCB Antenna, Tape and Reel packing | Buy |
| I540E0L8-I3LT | Bluetooth 5 + NFC | Embedded | 10 x 15 x 1.5 | LGA | MHF4 | RENO multi-protocol module with MHF4 Antenna connector, Tray packing | Buy |
| I540E0L8-I3LR | Bluetooth 5 + NFC | Embedded | 10 x 15 x 1.5 | LGA | MHF4 | RENO multi-protocol module with MHF4 Antenna connector, Tape and Reel packing | Buy |
